Auramix 300
Auramix 300 is a unique combination of the latest generation superplasticisers , based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete.
USES
Auramix 300 is a high performance retarding superplasticiser intended for applications where retardation and long workability retention are required, and it has been developed for use in:
- Pumped concrete
- Mass raft foundation
- High performance concrete.
- Concrete requiring long workability retention
Advantages
- Higher E modulus
- Lower permeability
- Reduced shrinkage and creep
- Better resistance to carbonation
- Improved adhesion to reinforcing and prestressing steel
- Increased durability
- Better resistance to aggressive atmospheric conditions
- Arrest bleeding and segregation due to presence of in-built VMA.
- Increased retardation controls the heat of hydration and yields high ultimate strength
Properties
* The uniformity parameters like specific gravity, pH, chloride content etc. will vary for specific customer requirements and mix design. Please refer our MTC issued for specific product configuration for measuring our product parameters that will be constantly and consistently administered.
| Appearance | pH | Volumetric mass @ 20°C | Chloride content | Alkali content |
|---|---|---|---|---|
|
Light yellow coloured liquid |
Minimum 6.0 * |
1.085 kg/litre |
Nil to IS:456 * |
Typically less than 1.5 g |