Flo-Grout 60

Flo-Grout 60 is pre-mixed, pre packed chloride free cementitious grout. It contains cement, selected additives, well graded, and non-reactive aggregates and is designed to give excellent flow properties, shrinkage compensation, frost resistance, and high compressive strength.

Applications

Flo-Grout 60 is ideally designed for use in the following applications:

  • Machine beds.
  • Pile top re-profiling.
  • Anchoring of tie bars, and bolts.
  • Filling of shutter tie rod openings.
  • Stanchion bases, struts, railings, and guardrail assemblies.
Products Catalogue

Advantages

  • High fl ow can be poured or pumped into variable gap widths down to 10 mm.
  • Easy to apply, single component which require only addition of water.
  • Good non-shrinkage characteristics.
  • Extremely dense and low permeability.
  • High early strength development allowing for rapid installation.

Technical Properties:

Technical Properties

Compressive strength:
ASTM C109/109M-11

≥ 25 MPa @ 1 day
≥ 45 MPa @ 3 days
≥ 55 Mpa @ 7 days
≥ 70 MPa @ 28 days

Flexural strength:
BS6319, Part 3 : 1990

≥ 8 Mpa @ 28 days

Colour:

Grey

Expansion characteristics:

ASTM C827/C827M-10

0.5 - 3%

Fresh wet density
2.2 ± 0.1 g/cm3

Application temperature
5 - 40°C

Service temperature:

-20 - 200°C