Description
One or two coats of Nitoprime Zincrich are generally required,
dependent largely on nature and profile of the steel substrate.
Nitoprime Zincrich is recoatable generally between 30 minutes
and 1 hour after the initial application. Application of concrete
repair materials may also proceed at this time. At elevated
temperatures, the recoatable and overlay times will be reduced.
The minimum application temperature for Nitoprime Zincrich is
5°C.
Advantages
- Formulated for use with Renderoc repair products
- Excellent protective barrier to the steel from further corrosive attack
- Single component product - easy to use with no restrictive pot-life
- Time saving - touch dry after 15 - 45 minutes
- Economical - single component ensures almost no waste
- Complies with AS4020:2018 - suitable for use in drinking water.
Properties
| Properties | |
|---|---|
|
Recommended thickness |
50 microns (dry) |
|
Application thickness per coat: |
120 microns (wet) |
|
Drying times – Touch dry: |
@ 20°C - 45 minutes |
|
Fully dry/recoatable: |
@ 20°C - 50 minutes - 1 hour |
|
VOC content: |
518g / litre |