BULWARK RAIN TITE
BULWARK RAIN TITE is the single component high quality liquid rubber with composition of Acrylic modified co polymer with dual rubber technology which can be added with any cement and can apply in water tank, sunken portion and also can be used as a effective base coat /Primer for any water proofing coating system. BULWARK RAIN TITE is composed of specially developed polymers, properly selected and graded fillers. It cures by sunlight and good air circulation and will give a tough flexible thin membrane.
AREA OF APPLICATION
- On any Concrete slab like Terrace, Sunken, Water Tank, swimming Pool, etc...
- Can be used as a premium quality primer in any water proofing system.
- Can be used as water proofing cum primer in exterior wall before painting.
- Wherever need Premium water proofing with heavy durability.
FEATURES
- Will Provide Tough, Flexible water proof membrane.
- Develops excellent bond to most building materials.
- Can be applied in uniform thickness to horizontal and vertical surfaces.
- Allows trapped vapor to escape thus preventing peeling and blistering
- BULWARK RAIN TITE is highly durable in continuous wet condition.
- BULWARK RAIN TITE is not harmful to the health of workman.
- BULWARK RAIN TITE is non-flammable and does not give off toxic gases, when exposed to fire,
- BULWARK PU300 is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalis.
TECHNICAL DATA
| PARAMETERS | TEST VALUE | METHOD |
|---|---|---|
|
Appearance |
MILK WHITE FREE FLOW LIQUID |
VISUAL |
|
VISCOSITY PER SECONDS |
7 +-1 |
IS 101 |
|
SOLID CONTENT |
55% +-2 (W/W) |
IS 101 |
|
PH VALUE |
> 7 |
IS 9103 |
|
14 days Bond Strength, N/mm2
|
20 (Minimum or concrete failure) |
ASTM C 882-87 |
|
28 days Compressive strength, N/mm2
|
30 (Minimum) |
IS 516 |
|
Recoating Time, at 27°C, 65% RH, HOURS |
03-05 hours |
IS 101 |
|
Full Cure |
14 DAYS |
IS 101 |
|
Ash Content, % (w/w) |
< 1.0% |
IS 101 |
|
Volatile organic Matter (VOC) %, (w/w) |
<1.0 |
IS 101 |