Nitocote Wallguard

Nitocote Wallguard is water based polymer coating composed of high quality acrylic polymer, with weather resistant pigments, properly selected & graded fine fillers.
It is used as a waterproofing & decorative coating for protection of exterior walls of the buildings from heavy wind driven rain.

Uses

Nitocote Wallguard provides acrylic elastomeric coating with inherent crack-bridging ability. Typical applications include :

  • Provides a high quality effective waterproofing cum decorative coating for exterior wall.
  • Prevents dampness of external wall subjected to severe weather in coastal environment
  • Ideally suitable or coating on all type of external masonry surfaces, concrete, cement sand renderings etc
Products Catalogue

Advantages

  • Ready to use - Dilution is not required
  • UV stability - Resistance to UV rays
  • Breathability - Allow internal moisture to escape.
  • Anti dirt - low dirt pick up & can be cleaned easily.
  • Microbial Resistance - Resistance to Algae, Fungi and bacterial attack
  • Ease of application - User friendly product, easily applicable by brush, roller or spray.
  • High build film - Higher film thickness provides tough waterproof membrane ensuring no ingress of water withstanding wind driven rain.
  • Highly flexible - Accommodates movement in the structure covers hairline cracks (upto 0.5 mm)
  • Elongation - Easily accomodates movement of thermal expansion & contraction. 100% elongation at 110-120 micron Dft crack bridging in excess of 0.5 mm

Properties

Properties

Appearance

Emulsion paint available in white, midtone and dark bases.

Specific Gravity

1.29

Appearance

Emulsion paint available in white, midtone and dark bases.

Specific Gravity

1.29

Elongation (110 micron DFT)
ASTM D412-02

>100%

Breathability
(ASTM E96)
22 gm/m2/day

Rapid chloride penetration test
(ASTM C1202-97)

Very low

Accelerated weathering (1000 hrs UV exposure), ASTM D
4587

No Defects

Tensile strength @ 250 micron
ASTM D412-02
>2.0 N/mm2

Crack bridging ability
(ASTM C836)

Passes > 0.5mm width

Adhesion strength
1.3N/mm2

Coating thickness DFT in two
coats

110 microns

Solar Reflectance Index (SRI)
Solar Direct Reflectance
Emissivity
Tested as per ASTM E 1980-19
(The above stated properties is for white colour shade)

95
>75%
>92%