Brushbond Roofguard

Brushbond Roofguard is a single component acrylic polymer modified, elastomeric fibre reinforced high build & easy roller applied / brushable coating available in different colours for application in multiple layers, minimum 3 layer application is recommended for best performance.

Uses

Brushbond Roofguard is high build fibre reinforced seamless
waterproofing render suitable for waterproofing of old & new
roofs, it is a polymer base product applied in three OR more
coats & each coat with different colours for monitoring correct
thickness.

Products Catalogue

Advantages

  • Excellent barrier to carbon dioxide, chloride and sulphate ions.
  • Allows water vapour to escape from the structure.
  • Durable in all climate conditions including UV attack.
  • No protection screed required eliminating the additional weight due to protection layer
  • The product can applied directly on existing sound concrete, brickbat coba, screed concrete even without removal
  • Excellent bond to concrete and masonry.
  • Good crack accommodation capacity.
  • Minimum surface preparation needed and low labour.
  • High Build system provides higher dry film thickness of more than 1mm in three coats.
  • High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack.

Properties

Properties

Solid Content

70 ±  3%

Tensile strength (ASTM D412)

1.10 Mpa

Elongation (ASTM D12)

100%

Resistance to ageing due to UV radition ASTM D4587 E

1000 hrs (No change)

Rapid chloride penetration ASTM C 1202-03

Very low

Pull off adhesion ASTM D4541

0.92 MPa

Resistance to Algae growth (ASTM D5589-97)

Passes, Zero rating

Permeability (mm) (BSEN 12390 part B)

5.0

Water vapour transmission (ASTM E96)
6.0 g/m2h