BULWARK ELASTO COAT

Bulwark Elasto coat is single component, Premium Hybrid Acrylic Membrane which is consists of specially developed polymers and properly selected components. Bulwark Elasto coat is not a usual  elastomeric coating unlike other elastomeric coating Bulwark Elasto coat made by using Pure  Acrylic Resin and Modified Kaolin which ensure long lasting performance. It cures by natural air,  sunlight and gives elastomeric waterproof membrane BULWARK ELASTO COAT is elastomeric innature and has good resistance to weather and sunlight

AREA OF APPLICATION

  • On Metal Roof
  • Exterior Side Walls
  • Open Terrace and
  • Any Open Surfaces
  • Wherever water proofing need with high elongation
Products Catalogue

FEATURES

  • Will Provide Tough, Flexible water proof membrane.
  • Develops excellent bond to most building materials.
  • Can be applied in uniform thickness to horizontal and vertical surfaces.
  • Allows trapped vapor to escape thus preventing peeling and blistering
  • BULWARK ELASTO COAT is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalis.
  • BULWARK ELASTO COAT is non-flammable and does not give off toxic gases
  • BULWARK ELASTO COAT is not harmful to the health of workman

TECHNICAL DATA

PARAMETERS TEST VALUE METHOD

Appearance

White But Tintable 

Visual

Elongation

380% ± 40

ASTM D 412

Water Penetration Test @ 3 bar

No Penetration

DIN1048:PT5:91

Accelerated weather resistance

Passes the test

ASTMG154

Crack Bridging ability

No crack at 2mm gap

ASTM D2240:91

Solid Content

62+-2

IS STD TES

Abrasion /Hardness

High

ASTMD240:2002

Adhesive Strength

2.1N/mm2

ASTM D3359

Algae & Fungus Resistant

High (No Growth)

(ss 345:1998)

Recoating Time, at 27°C, 65% RH, HOURS

03-04 hours

IS 101

Full Cure

2 DAYS

IS 101

Consistency

5-10% Potable water

IS 101

Volatile organic Matter (VOC) %, (w/w)

<0.8%

IS 101

SRI (White Base)

110 ±5

ASTM E1980

Thickness

900Microns ±200 wet film  thickness

ASTM D 1640