CHRYSO® EXCEM PMC 60

CHRYSO EXCEM PMC60 is a single component cementitious, polymer modified non-reactive selective fiber reinforced repairmortar to provide excellent properties as well as resistance to corrosion and carbonation and shrinkage cracking. CHRYSO EXCEM  PMC60 can be applied in thickness from 10 mm to 40 mm in vertical and 25 mm in overhead situation. It is suitable to apply by hand trowel or by special mortar spray machine.

Products Catalogue

Application

CHRYSO EXCEM PMC 60 shall be applied with a steel trowel on
a prepared SSD concrete surface with a thickness from 10mm
to 40mm. If the thickness is more than 40mm, another layer
shall be applied after 24 hours from the application time of
previous layer.

Safety

  • Wear hand gloves, safety shoes and safety goggles while using and handling the product.
  • while using and handling the product. In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.

Advantages

  • Excellent bond to the concrete and steel substrate
  • Controlled expansion to ensure positive surface contact
  • Chloride free and non metallic, hence no rusting or staining on exposed edges
  • Wear hand gloves, safety shoes and safety goggles while using and handling the product.
  • In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.

Indicative Characteristics

Indicative Characteristics

Appearance

Free flowing grey powder
Compressive Strength, N/mm2 (Typical) at 27°C

( W/P= 0.15)

1day

>15

7days

>50

28 days

>60

Free linear Expansion,
ASTM C 827

0-2%

Coefficient of Thermal
Expansion, per 0C
11-12x10-6 (Similar to Concrete)
Flexural Strength, 28 days, N/mm2 (Typical) at 27°C

>7
Bond Strength, 28 days, N/mm2 (Typical) at 27°C

>2

Pot Life, at 27°C, minutes

>30
Fresh Wet Density, kg/m3

2150 - 2250

Material required for 1m3 Volume ,kg

1850-1950