CHRYSO® TAPELASTIC PREMIA

CHRYSO TAPELASTIC-PREMIA is a two component, high performance, elastomeric, acrylic polymer modified cementitious waterproofing protective coating system in slurry form.

Products Catalogue

Domains of Application

  • CHRYSO TAPELASTIC-PREMIA can be reinforced with fibre glass mats
  • CHRYSO TAPELASTIC-PREMIA is used as a waterproofing treatment for large roof, basement rafts, against rising dampness, retaining structures, water bodies, reservoirs, balconies, bathrooms, sunken areas, fountains, dome structures, bridge decks, podium and terraces. Also used as anti- carbonation coating.
  • Damp patches on walls, to seal joints through which there is possibility of water ingress and in any other area, where a quick solution for waterproofing and damp proofing is required.

Advantages

  • Prevents peeling and blistering
  • Resistant to UV (Ultra - Violet) rays
  • Unaffected by chemical attacks ranging from mild acids and strong alkalis.
  • Arrests salt petre and prevent penetration of salts into concrete and mortar.
  • Highly durable in continuous wet service condition.
  • One time application, properties improve with age.
  • Develops excellent bond with most of the building materials.
  • Versatile product – can be used for waterproofing, bonding agent for old concrete to new concrete and repair mortar.

Indicative Characteristics

Indicative Characteristics

Color of Pack-A (Liquid)

Milky White

Color of Pack-B (Powder)

Grey

Color of hardened coating

Cement like Grey

Permeability to water, as
per IS 2645

Nil

Workable time, minutes,
27°C, 70% RH

30 (approx.)

% Elongation at 14 days,
ASTM D 638

130 ( minimum)
Tensile strength at 14 days, N/mm2 ASTM D 638

5 ( minimum with fibre
mesh)

Coverage
1.5-1.7kg/mm/m2

Mix Ratio (Liquid: Powder)
by wt.

1:1.4

Static Crack Bridging
Capacity

2mm ( minimum)

Recommended film
Thickness

1-1.5mm

Initial cure for light foot
traffic at 65% RH,

12 hours

Full Cure at 65% RH

7 days