Conplast WL Xtra

Conplast WL Xtra is a dark brown liquid based on cement  dispersion polymers which mixes readily with water and  therefore disperses evenly.  Conplast WL Xtra waterproofs by improving the quality of the  concrete or mortar. It reduces the water demand for required  workability and minimises segregation and bleeding. Thus it is  more efficient compared to traditional powder and conventional integral waterproofing compounds as its use results in two fold  improvement of concrete or mortar

Products Catalogue

Application Instructions

To minimise permeability and increase the waterproofing  properties of concrete, plaster and cement sand mortars for critical applications like roof slabs,screeds, basements, external  plastering, bathroom floors, water tanks, sumps, drains etc

  • Place the concrete or apply plaster, as needed.
  • Start addition of 75–80% mixing water & mix for 2-3 minutes.
  • Add cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1 minutes
  • Cure the applied mortar or concrete as per good construction practices or use Fosroc Concure curing compounds.
  • Fosroc Conplast WL Xtra is added as per the recommended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.

FEATURES AND BENEFITS

Cohesive Mix :  Improves workablity and cohesiveness  of the concrete.

Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.

Corrosion resistant : Meets the requirements of Japanese code JIS Z1535 (modified) first of kinds in  the integral water proofing range.

Advanced Technology : New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.

High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.

Properties

* The uniformity parameters like specific gravity, pH, chloride content etc. will vary for specific customer requirements and mix design. Please refer our MTC issued for specific product configuration for measuring our product parameters that will be constantly and consistently administered.

Chloride content Compatibility Permeability to water Setting Time Compressive Strength Workability

As per IS:2645-2003.

Can be used with all types of cements, including pozzolanic but not High Alumina Cement.

< 10% as compared to 50%  max. allowable under IS:2645 compared to control sample.

No significant effect on setting time of concrete or mortar.

Maintains compressive strength  equal to control concrete or mortar and can even improve on strength property if full advantage of water reduction potential is utilised.

Improves workability at reduced  water cement ratio