C01 HYGUARD EX
Roff Hyguard EX is a two component, polymer-modified, flexible cementitious waterproofing coating specially
formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry powder is mixed with acrylic modified emulsion and applied
AREA OF USE
On surface/ substrate – Plaster surfaces, cement-based screeds, concrete, masonry surface, light weight block.
Area of application – Wet areas such as bathrooms, showers, kitchen etc. Water bodies like swimming pool, water tank, fountains etc. Concrete Roof, domestic applications, commercial applications.
LIMITATIONS
- It is recommended for under tile waterproofing. For large interior basement walls waterproofing & other critical waterproofing, please connect with Roff Technical team.
- Roff Hyguard EX is meant for the waterproofing coating, not for load bearing.
- Roff Hyguard EX is not suitable for high traffic area application.
FEATURES AND ADVANTAGES
- Easily apply by brush/ roller.
- Flexible - Bridges cracks in concrete/ surfaces.
- Excellent adhesion to concrete and masonry substrates
- Low VOC - For healthy living.
- Conforms to portable water contact parameters.
- Provides a waterproof surface & eliminate water leakage.
TECHNICAL INFORMATION
| Testing Properties | Test Results | ||
|---|---|---|---|
|
Appearance |
Part A - White Liquid |
||
|
Density |
2 ± 0.05 kg/ litre |
Application Temperature |
10°C to 40°C |
|
Density |
2 ± 0.05 kg/ litre |
Application Temperature |
10°C to 40°C |
|
Mixing Ratio (w/w) |
1 part of liquid (Pack A) |
||
|
Pot life of mixed material |
Minimum 2 hours |
||
|
Touch Dry |
30 to 40 mins |
||
|
Over-coating Interval |
4 to 6 hours |
||
|
Colour of Cured Film |
Grey |
||
|
Adhesion on Concrete as per ASTM D 7234 |
> 0.5 N/mm2
|
||
|
Resistance to water penetration (DIN 1048) |
Passed with no water penetration |
||
|
Water Permeability @ 5bar (EN 12390-8) |
NIL |
||
|
Water Portability (IS10500) |
Portable |