LIQUISEAL PS PG

Liquiseal PS PG (Pouring Grade) is two part polysulphide sealant. After mixing the base components and curing agent in given proportion, a rubber like material in pourable consistency is formed. It adheres to cementitious substrates, aluminium, glass, wood, mild steel and other construction surfaces.

Products Catalogue

Uses

PS PG is used for sealing horizontal expansion joints
in roads and culverts, bridge deck joints, car-parking,
airport runways, floor concrete to masonry separation
Joints.

Advantages

  • Easy to use.
  • Economical.
  • Good Chemical and Water resistance.
  • Good UV resistance and weatherability.
  • High movement accommodation factor.
  • Adhesion compatible to most of the substrate.

Product Information

Appearance : Paste

Colour : Part A – Off white , Part B -Brown

Mixing Ratio : Part A : Part B = 92 : 8 (by weight)

Pot Life : 60-120 min @ 30°C

Curing Time  : 7 Days ( Full Cure)

Specific Gravity (After mix) :  1.50 ± 0.2 @ 30°C

Mechanical Properties

Mechanical Properties

Tensile Strength

> 2.5 kg/cm2

Elongation

> 600 %

Shore A Hardness

> 8 to <14

Application Temperature

5°C to 45°C

Service Temperature

-20°C to +60 °C