TECHOXY 3

TECHOXY-3 is a two component epoxy resin based waterproofing compound. One part consists of epoxy resin and the other part of curing agent. After mixing both the parts, it can be thinned down with water. It possesses all the attributes of normal solvent based epoxy compositions such as excellent water and chemical resistance, adhesion, hardness, toughness and mechanical strength. One of the major advantages of Techoxy-3 over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents, it does not pose any health hazard to the applicator. Techoxy-3 is completely, consistent & economical to apply.

APPLICATION

  • Toilet and kitchen walls.
  • Hatcheries & aqua farms.
  • Damp walls (interior / exterior )
  • Cement-concrete water storage tanks
  • As a primer before painting (interior / exterior )
  • Coating on walls of breweries & food processing industries.
  • As a putty with OPC-white cement to fill the fine cracks of external walls
  • As an undercoat before applying Techoat 61-P & Tar-o-Thane on roof terrace and internal walls.
Products Catalogue

FEATURES / ADVANTAGES

  • Water dilutable
  • Reduces water permeability
  • Eco friendly & non-toxic in nature
  • After curing it forms hard, tough and strong film.
  • Being water based, it penetrates in concrete/plaster surface and seals the porosity and network of fine cracks.
  • Excellent resistance to positive (hydrostatic) water pressure
  • Bonds strongly on cement concrete/mortar, plaster, asbestos sheet etc.
  • Excellent resistance to water, salt water, dilute acids, alkalis, soap water, and other chemicals

TECHNICAL INFORMATION

CHARACTERISTICS VALUE

Nature

two components

Mixing Ratio

Part 1 : Part 2 : Water

1 : 1 : 1 parts by weight

Consistency after mixing

Free flowing smooth paste

Application time (Pot life) at 30°C
1 to 1 1⁄2 hrs

Drying time at 30°C
Surface dry
Hard dry

5 to 6 hrs
50 to 60 min
16 to 18 hrs

Inter-coat period at 30°C

16 to 18 hrs

Curing time at 30°C

24 hrs

Application time for Techoat 61-P (Polyurethane coating)

not more than 24 hrs at 30°C

Coverage

70-80 sq.ft./kg/coat